Maximus Pedestal Systems
Adjustable supports for exterior elevated floors, it's the most innovative solution that can be used on all of your installations. The simplicity and functionality of this system is to make the job easier and efficient.
The
Maximus triple screw thread technology outperforms most other products on the market.
-
In addition to the ease of installation, the after sales service was impeccable.
THOMAS J. PHOENIX PARK
MAXIMUSSENIOR
-
Uniquely designed multifunction head for rapid adjustment by hand or high speed chuck.
MAXIMUSSENIOR
-
4mm tile spacer tab included in everybox. Allows for superior water drainage and easy maintenance.
MAXIMUSSENIOR
-
100mm extenders with twist lock technology clip in fast to achieve heights up to 1,000mm
MAXIMUSSENIOR
Maximus eliminates 3-4 pedestals from our competitors range
- 1
pedestal (range 45mm – 145mm)
- 2
products for unlimited height (100mm extenders sold separately)
- 3
options to operate adjustment
Less is more
Maximus has the advantage of:
-
SIMPLICITY -
SPEED -
USEABILITY -
FLEXIBILTY
With 100mm extenders available, any height can be reached to achieve your design intent on terraces, balconies, roof terraces or outdoor areas.
What is included + the addons you can order
INCLUDED:
-
MAXIMUMSENIOR
-
4MM SPACER TAB
ACCESSORIES (ADDITIONAL OPTIONS):
-
TIMBER JOIST BRACKET
-
100 MM EXTENDERS
-
1MM RUBBER SHIM
-
1-3 DEGREE SLOPE CORRECTOR
-
MAINTENANCE ADJUSTMENT KEY
-
HIGH SPEED CHUCK
Pedestal system benefits
-
RAPID WATER OUTFLOW
-
Durable and load rated
-
A Superior performing system designed and built to last
-
Speed of installation
-
Increased thermal insulation
-
Excellent Absorption for expansion
-
Elevated system to run services, conduits and pipes
-
Ease of maintenance
-
Installs level with seamless connections
Retrofitting and Low Height solutions
Maximus has options available to retrofit an elevated flooring system over existing substrates or new installs for areas with limited or low level heights.
-
-
Height Adjustment
-
MAXIMUS JUNIOR
Range 20mm - 45mm
(4mm spacer tab included)
Installing the Maximus System
Maximus Stockist
Click below to find your local maximus retail outlet.
Click below to find your local maximus retail outlet.
Frequently asked questions
-
How do I use a Maximus pedestal in a corner, do I cut anything?
No, The base of the Maximus pedestal has been designed to be pushed hard up into a corner.
-
How much weight can the Maximus pedestal hold
The Maximus system has been load tested to 1,000kgs in an Australian NATA certified laboratory.
-
What are the best substrates to use the Maximus system
Concrete substrates will achieve the best performance
-
What compatible materials can be used
Engineered porcelain (min 20mm), natural stone, marble, granite, prefabricated concrete, decking (mod wood, timber)
-
Can I use the Maximus pedestal upside down
No, Maximus has been designed to achieve all applications without having to use it upside down.
-
Where can I use the Maximus pedestal system
On pre-existing floors, on cement foundations, on every type of membrane system inc, liquid, bituminous or synthetic.
-
How do I use the high speed chuck to adjust the pedestal
Use the chuck with an electric screwdriver or a drill on low clutch setting only. DO NOT use with an impact driver Insert the chuck into the hole on the top of the pedestal head. Put your tool in reverse, hold the base of the pedestal and it will increase in height.
-
How do I remove the base to add 100m extenders
Hold the body of the pedestal in one hand and turn the base anti-clockwise until it unclicks. Separate the base from the pedestal. Place an extender into the base and turn it clockwise until it clicks into position. Next sit the pedestal on the top of the extender and turn it clockwise until it clicks into position.
-
How do the slope correctors work
Each slope corrector is designed with a gradient to compensate for substrate falls. Add the slope corrector to the bottom of the pedestal. It will locate into the guide spaces on the base. To increase gradient simply add additional slope correctors. They are all able to be stacked together.